| FOR METRIC CONVERSION | ||||||||
| BIT SPECIFICATIONS | ||||||||
| CONVENTIONAL | ||||||||
| Hammer | Bit Shank | Bit Range (in.) | Weight (lbs.) | Face Design | ||||
| Patriot 35A | C35/3.5 | 3-1/2 to 4-1/8 | 14 - 15 | Flat, Convex | ||||
| Champion 40 | 340A | 4-1/4 to 5-1/8 | 18 - 21 | Flat, Concave, Convex | ||||
| DCS5 | QL50 | 5-1/2 to 6-1/8 | 33 - 36 | Flat, Concave, Convex | ||||
| Patriot 50 | QL50 | 5-1/2 to 6-1/8 | 33 - 36 | Flat, Concave, Convex | ||||
| DCS6 | QL60 | 6 to 8-1/2 | 48 - 68 | Flat, Concave, Convex | ||||
| Patriot 60W | 360 | 6 to 8-1/2 | 52 - 72 | Flat, Concave, Convex | ||||
| Patriot 60WQ | QL60 | 6 to 8-1/2 | 48 - 68 | Flat, Concave, Convex | ||||
| Challenger 6 | 360 | 6 to 8-1/2 | 52 - 72 | Flat, Concave, Convex | ||||
| Patriot 80 | 380 | 7-7/8 to 10 | 100 - 125 | Flat, Concave | ||||
| Challenger 80 | 380 | 7-7/8 to 10 | 100 - 125 | Flat, Concave | ||||
| Challenger 80Q | QL80 | 7-7/8 to 10 | 100 - 125 | Flat, Concave | ||||
| Challenger 100 | N100 | 9-7/8 to 15 | 210 - 377 | Flat, Concave | ||||
| Patriot 120 | N11/N120 | 11-7/8 to 17-1/2 | 384 - 571 | Flat, Concave | ||||
| Challenger 120 | N11/N120 | 11-7/8 to 17-1/2 | 384 - 571 | Flat, Concave | ||||
| Patriot 125 | N125 | 12-1/4 to 20 | 433 - 779 | Flat, Concave | ||||
| Challenger 125 | N125 | 12-1/4 to 20 | 433 - 779 | Flat, Concave | ||||
| Patriot 180 | C180 | 18 to 30 | 1029 - 2275 | Flat, Concave | ||||
| Patriot 240 | C240 | 24 to 34 | 2174 - 3378 | Flat, Concave | ||||
| Champion 330 | C330 | 33 to 43 | 5000 - 7500 | Flat, Concave | ||||
| REVERSE CIRCULATION | ||||||||
| Hammer | Bit Shank | Bit Range (in.) | Weight (lbs.) | Face Design | ||||
| Champion RC45 | RC45 | 4-3/4 to 5-1/2 | 36 - 38 | Concave | ||||
| Patriot RC46 | PRC46 | 5 to 5-3/4 | 31 - 34 | Concave | ||||
| Challenger RC100 | RC100 | 10 to 15 | 255 - 525 | Concave | ||||
| Champion RC160 | RC160 | 16 to 20 | 950 - 1121 | Concave | ||||
| Champion RC210 | RC210 | 21 to 26 | 1765 - 2320 | Concave | ||||
| Champion RC300 | RC300 | 30 to 36 | 3847 - 5022 | Concave | ||||
| SUPER JAWS® OVERBURDEN DRILLING SYSTEMS | ||||||||
| Español pdf | Français pdf | ||||||||
| System Bit Size |
Applicable Hammer (Standard) |
No. of Wings | Outer Diameter of Bit | Applicable Casing | Drive Shoe Inner Dia. (in.) | |||
| Expanded (in.) |
Retracted (in.) |
Inner Diameter (in.) |
Outer Diameter (in.) |
|||||
| T115 | C40 | 2 | 5.827 | 4.527 | 5.000 | 5.500 | 4.567 | |
| T140 | P50 | 2 | 7.283 | 5.550 | 6.110 | 6.625 | 5.591 | |
| T150 | P50/P60W/WQ | 2 | 7.750 | 5.905 | 6.485 | 7.000 | 6.023 | |
| T165 | P60W/WQ | 2 | 8.346 | 6.500 | 7.204 | 7.625 | 6.575 | |
| T190 | P60W/WQ | 3 | 9.329 | 7.520 | 8.060 | 8.625 | 7.559 | |
| T215 | P80 | 3 | 10.379 | 8.385 | 8.894 | 9.625 | 8.465 | |
| T240 | P80 | 3 | 11.420 | 9.448 | 10.000 | 10.750 | 9.527 | |
| T280 | N100 | 3 | 13.410 | 11.102 | 11.878 | 12.750 | 11.181 | |
| T315 | N100/P125 | 3 | 14.685 | 12.402 | 13.402 | 14.000 | 12.480 | |
| T365 | P125 | 4 | 16.926 | 14.370 | 15.250 | 16.000 | 14.449 | |
| T410 | P125 | 4 | 18.819 | 16.220 | 17.125 | 18.000 | 16.300 | |
| T455 | P125 | 3 | 20.867 | 17.937 | 19.000 | 20.000 | 18.071 | |
| T510 | P180 | 4 | 22.875 | 19.921 | 21.000 | 22.000 | 20.158 | |
| T560 | P180/P240 | 4 | 24.882 | 21.890 | 23.000 | 24.000 | 22.126 | |
| T610 | P240 | 3 | 26.850 | 23.812 | 25.000 | 26.000 | 24.133 | |
| T660 | P240 | 4 | 28.859 | 25.825 | 27.000 | 28.000 | 26.063 | |
| T710 | P240 | 4 | 30.875 | 27.834 | 29.000 | 30.000 | 28.000 | |
| T760 | P240 | 4 | 32.875 | 29.842 | 31.000 | 32.000 | 30.000 | |
| T810 | P240 | 4 | 34.882 | 31.850 | 33.000 | 34.000 | 32.008 | |
|
All casing sizes are nominal. |
||||||||
| SUPER JAWS® ND OVERBURDEN DRILLING SYSTEMS | ||||||||
| Español pdf | Français pdf | ||||||||
| System Bit Size |
Applicable Hammer (Standard) |
No. of Wings | Outer Diameter of Bit | Applicable Casing | ||||
| Expanded (in.) |
Retracted (in.) |
Inner Diameter (in.) |
Outer Diameter (in.) |
|||||
| T105 ND | P35A | 2 | 5.540 | 4.074 | 4.250 | 5.125 | ||
| T115 ND | C40 | 2 | 5.827 | 4.527 | 4.670 | 5.500 | ||
| T117 ND | C40 | 2 | 6.000 | 4.589 | 4.670 | 5.500 | ||
| T130 ND | C40 | 2 | 6.400 | 4.983 | 5.118 | 6.000 | ||
| T140 ND | P50 | 2 | 7.280 | 5.551 | 5.625 | 6.625 | ||
| T150 ND | P50/P60W/WQ | 2 | 7.750 | 5.880 | 6.000 | 7.000 | ||
| T165 ND | P50/P60W/WQ | 2 | 8.340 | 6.500 | 6.625 | 7.625 | ||
| T190 ND | P60W/WQ | 3 | 9.329 | 7.520 | 7.625 | 8.625 | ||
| T215 ND | P80 | 3 | 10.375 | 8.307 | 8.565 | 9.625 | ||
| T240 ND | P80 | 3 | 11.420 | 9.449 | 9.560 | 10.750 | ||
| T265 ND | N100 | 3 | 12.400 | 10.430 | 10.715 | 11.875 | ||
| T292 ND | N100 | 3 | 13.810 | 11.398 | 11.560 | 12.750 | ||
| T302 ND | N100 | 3 | 14.250 | 11.890 | 12.125 | 12.750 | ||
| T385 ND | P125 | 4 | 17.680 | 15.125 | 15.375 | 16.000 | ||
|
All casing sizes are nominal. Casing specifications required upon placement of order. Other sizes may be available upon request. |
||||||||