| FOR IMPERIAL CONVERSION | ||||||||
| BIT SPECIFICATIONS | ||||||||
| CONVENTIONAL | ||||||||
| Hammer | Bit Shank | Bit Range (mm) | Weight (kg) | Face Design | ||||
| Patriot 35A | C35/3.5 | 89 - 105 | 6 - 7 | Flat, Convex | ||||
| Patriot 40 | 340A | 108 - 130 | 8 - 10 | Flat, Concave, Convex | ||||
| Champion 40 | 340A | 108 - 130 | 8 - 10 | Flat, Concave, Convex | ||||
| DCS5 | QL50 | 140 - 156 | 15 - 16 | Flat, Concave, Convex | ||||
| Patriot 50 | QL50 | 140 - 156 | 15 - 16 | Flat, Concave, Convex | ||||
| DCS6 | QL60 | 152 - 216 | 21 - 31 | Flat, Concave, Convex | ||||
| Patriot 60W | 360 | 152 - 216 | 24 - 32 | Flat, Concave, Convex | ||||
| Patriot 60WQ | QL60 | 152 - 216 | 21 - 31 | Flat, Concave, Convex | ||||
| Challenger 6 | 360 | 152 - 216 | 24 - 32 | Flat, Concave, Convex | ||||
| Patriot 80 | 380 | 200 - 254 | 45 - 57 | Flat, Concave | ||||
| Challenger 80 | 380 | 200 - 254 | 45 - 57 | Flat, Concave | ||||
| Challenger 80Q | QL80 | 200 - 254 | 45 - 57 | Flat, Concave | ||||
| Challenger 100 | N100 | 251 - 381 | 96 - 171 | Flat, Concave | ||||
| Patriot 120 | N11/N120 | 302 - 445 | 174 - 259 | Flat, Concave | ||||
| Challenger 120 | N11/N120 | 302 - 445 | 174 - 259 | Flat, Concave | ||||
| Patriot 125 | N125 | 311 - 508 | 197 - 354 | Flat, Concave | ||||
| Challenger 125 | N125 | 311 - 508 | 197 - 354 | Flat, Concave | ||||
| Patriot 180 | C180 | 457 - 762 | 467 - 1034 | Flat, Concave | ||||
| Patriot 240 | C240 | 610 - 864 | 987 - 1534 | Flat, Concave | ||||
| Champion 330 | C330 | 838 - 1092 | 2270 - 3409 | Flat, Concave | ||||
| REVERSE CIRCULATION | ||||||||
| Hammer | Bit Shank | Bit Range (mm) | Weight (kg) | Face Design | ||||
| Patriot RC46 | PRC46 | 133 - 146 | 15 - 16 | Concave | ||||
| Challenger RC100 | RC100 | 254 - 381 | 116 - 238 | Concave | ||||
| Champion RC160 | RC160 | 406 - 508 | 431 - 509 | Concave | ||||
| Champion RC210 | RC210 | 533 - 660 | 801 - 1053 | Concave | ||||
| Champion RC300 | RC300 | 762 - 914 | 1747 - 2280 | Concave | ||||
| SUPER JAWS® OVERBURDEN DRILLING SYSTEMS | ||||||||
| Español pdf | Français pdf | ||||||||
| System Bit Size |
Bit Shank (Standard) |
No. of Wings | Outer Diameter of Bit | Applicable Casing | Drive Shoe Inner Dia. (mm) | |||
| Expanded (mm) |
Retracted (mm) |
Inner Diameter (mm) |
Outer Diameter (mm) |
|||||
| T115 | 340A | 2 | 148.0 | 115.0 | 127.0 | 139.7 | 116.0 | |
| T140 | QL50 | 2 | 185.0 | 141.0 | 155.2 | 168.3 | 142.0 | |
| T150 | QL50/360/QL60 | 2 | 196.9 | 150.0 | 164.7 | 177.8 | 153.0 | |
| T165 | 360/QL60 | 2 | 212.0 | 165.1 | 183.0 | 193.7 | 167.0 | |
| T190 | 360/QL60 | 3 | 237.0 | 191.0 | 204.7 | 219.0 | 192.0 | |
| T215 | 380/QL80 | 3 | 264.0 | 213.0 | 225.9 | 244.5 | 215.0 | |
| T240 | 380/QL80 | 3 | 290.0 | 240.0 | 254.0 | 273.0 | 242.0 | |
| T280 | N100 | 3 | 341.0 | 282.0 | 301.7 | 324.0 | 284.0 | |
| T315 | P125 | 3 | 373.0 | 315.0 | 337.0 | 355.6 | 317.0 | |
| T365 | P125 | 4 | 430.0 | 365.0 | 387.4 | 406.4 | 367.0 | |
| T410 | P125 | 4 | 478.0 | 412.0 | 435.0 | 457.2 | 414.0 | |
| T455 | P125 | 3 | 530.0 | 455.6 | 482.6 | 508.0 | 459.0 | |
| T510 | P180 | 4 | 581.0 | 506.0 | 533.4 | 558.8 | 512.0 | |
| T560 | P180/P240 | 4 | 632.0 | 556.0 | 584.2 | 609.6 | 562.0 | |
| T610 | P240 | 3 | 682.0 | 605.0 | 635.0 | 660.4 | 613.0 | |
| T660 | P240 | 4 | 733.0 | 656.0 | 685.8 | 711.2 | 662.0 | |
| T710 | P240 | 4 | 784.0 | 707.0 | 736.6 | 762.0 | 711.0 | |
| T760 | P240 | 4 | 835.0 | 758.0 | 787.4 | 812.8 | 762.0 | |
| T810 | P240 | 4 | 886.0 | 809.0 | 838.2 | 863.6 | 813.0 | |
|
All casing sizes are nominal. |
||||||||
| SUPER JAWS® ND OVERBURDEN DRILLING SYSTEMS | ||||||||
| Español pdf | Français pdf | ||||||||
| System Bit Size |
Bit Shank (Standard) |
No. of Wings | Outer Diameter of Bit | Applicable Casing | ||||
| Expanded (mm) |
Retracted (mm) |
Inner Diameter (mm) |
Outer Diameter (mm) |
|||||
| T105 ND | C35/3.5 | 2 | 140.7 | 103.5 | 108.0 | 130.2 | ||
| T117 ND | 340A | 2 | 152.4 | 116.6 | 118.6 | 139.7 | ||
| T130 ND | 340A | 2 | 162.6 | 126.6 | 130.0 | 152.4 | ||
| T140 ND | QL50 | 2 | 184.9 | 141.0 | 142.9 | 168.3 | ||
| T150 ND | QL50/360/QL60 | 2 | 196.9 | 149.4 | 152.4 | 177.8 | ||
| T165 ND | QL50/360/QL60 | 2 | 211.8 | 165.1 | 168.3 | 193.7 | ||
| T190 ND | 360/QL60 | 3 | 237.0 | 191.0 | 193.7 | 219.1 | ||
| T215 ND | 380/QL80 | 3 | 263.5 | 211.0 | 217.6 | 244.5 | ||
| T240 ND | 380/QL80 | 3 | 290.1 | 240.0 | 242.8 | 273.0 | ||
| T265 ND | N100 | 3 | 315.0 | 264.9 | 272.2 | 301.6 | ||
| T292 ND | N100 | 3 | 350.8 | 289.5 | 293.6 | 323.9 | ||
| T302 ND | N100 | 3 | 362.0 | 302.0 | 308.0 | 323.9 | ||
| T385 ND | P125 | 4 | 449.1 | 384.2 | 390.5 | 406.4 | ||
|
All casing sizes are nominal. Casing specifications required upon placement of order. Other sizes may be available upon request. |
||||||||